![]()
You can only upload a photo (png, jpg, jpeg) or a video (3gp, 3gpp, mp4, mov, avi, mpg, mpeg, rm).You can only upload a photo or a video.Since I want to use all 4 slots this solution is not optimal for me. The uncompressed IMG will use 2 GB and the hd will have 4 primary partitions so you can't use the remaining space for anything else. You can have a taste of FreeNAS (even latest version) by flashing the IMG directly to a HDD, then plug it in the Slot 1 (all USB free). #INSTALL FREENAS HP MEDIASMART SERVER EX495 ISO#Some ISO live cd work others not, the utility Rufus 2.1.649 will helped you out building a bootable usb key with an ISO os. An extended sata cable can be connected to the top hd slot and will allow you to connect a cdrom drive instead of USB key. If the USB key at the bottom is not valid then it goes to the slot 1 then the SMI drive which is the recovery OS as you know. The only OS version that seems to support it (besides Windows) is FreeBsd, A usb boot key can be plugged it at the back at the bottom port, but it needs to have MBR with a fat partition to boot anything from it.Ī USB key with an IMG flashed on it won't work. Others things to consider: The network card (SIS191) is not well supported in Debian, Ubuntu (I never was able to make it work). Without it only slot 1 and 3 are accessible from other OS. You need to access the bios to set the 4 drives in IDE mode (instead of Raid). I have the extension cable (vga only) which helped me a lot. #INSTALL FREENAS HP MEDIASMART SERVER EX495 UPDATE#I'll leave an update with the results Good luck I've spent too much time with this beast, I'm not about to give it up. My next target is to try the internal SMI drive with a smaller IMG, (after a backup of its original OS). ![]() #INSTALL FREENAS HP MEDIASMART SERVER EX495 INSTALL#I would like to get this going without having to spend a ton of money on vga clables, what I can't understand is that I can install server 2012 unattended through the usb key onto the first hard drive And ideas? All hope is not lost. #INSTALL FREENAS HP MEDIASMART SERVER EX495 PC#nothing I booted this USB on a different pc and it does work I returned it to the ex475 and still nothing I then installed freenas on one of the hard drives through a PC, returned the hdd to the first slot still nothing, All other hard drives were removed except the USB drive and the first hard drive in the hopes that at least one of them would boot, after leaving it for half an hour just in case something was happening, there was no network response which means something is holding up the boot process. ![]() I have searched the internet and cannot find a working solution So far I have done the following using V9.3 created a USB boot disk from Image booted ex475 with first drive out. As it does not have any VGA output, my option is to take out its hard disk. Hello, I'm planning to install FreeNAS on my HP MediaSmart Server (LX197). ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |